Old Barn Faux Wood Arched Beam

Production Time	Approx. 4 to 6 weeks *This is an estimate based upon size of order
Subtotal	/ each

Our Old Barn faux wood beams feature the weathered, perfectly-aged appearance of reclaimed barn wood, highlighting the same beautiful grain lines and texture of the real thing. These beams are great for trusses, or as interior and exterior accents.

Our high-quality faux wood beams are a practical, cost-effective way to achieve the look of real wood beams in your space, without the added expense or stress. They are affordable, lightweight, easy to install, and virtually maintenance-free.

Old Barn faux beams can be custom built to your exact specifications, and are available unfinished (primed for painting or staining-gel stain only), or in one of our prefinished colors. See and feel the difference—order your Old Barn faux wood beam sample today! The cost of up to 5 samples is deducted from your full product purchase. Most samples ship within 2-3 days.

Get started with our beam installation instructions.

Product notes:

We HIGHLY RECOMMEND purchasing a sample prior to ordering so that you can see the finish in person since color displayed is highly monitor dependent. The cost of up to five (5) samples will be deducted from a full-sized product purchase.
Dimensions specified are outside dimensions of the product. Material is approximately 1 inch thick +/- ¼".
Products are hand fabricated. Allow at least ½ inch tolerance when covering existing materials.
Products have screws embedded in them. Screws can be located with a stud finder. We recommend cutting with a hand saw to avoid injury. AZ Faux is not responsible for bodily harm or equipment damage if power tools are used.
LTL shipping costs for beams typically start at about $300 per shipment. Shipping and tax estimates can be easily obtained under order details in the cart section of the website.
Arched beams with a rise of 34 inches or greater will be manufactured as a single beam then cut in half for shipping. All other arched beams will be cut in half if they exceed 21 feet in length.

Texture	Lightly distressed, perfectly aged appearance. Beautiful grain lines are light and weathered.
Construction	Box Beam
Corners	Mitered
Sides	2, 3 or 4
Material Thickness	Approximately 1" (can vary +/- ¼”)
4 Sided Beam	4 sided beams ship as two pieces – a three-sided beam plus a fitted panel (4th side) to be installed on site.
Inner Dimensions - 3 Sided Beam	Approximately 2” less than specified outer width and 1” less than specified outer height. These are hand fabricated, inner dimensions may vary slightly. Please allow tolerance when covering other materials.
Inner Dimensions - 4 Sided Beam	Approximately 2” less than specified outer dimensions. These are hand fabricated, inner dimensions may vary slightly. Please allow tolerance when covering other materials.
Outer Dimension Variance	Outer dimensions can vary +/- ¼”. Products are hand fabricated, please allow a tolerance.
Endcaps	Available
Endcap Choices	Standard (available on any size), Scrolled (available for beams with heights between 6" and 24")
Material	High-Density Polyurethane
Product Weight	3-sided 4"x4"x120" beam is 12lbs. Actual weight, based on customizations, will be visible when the product is added to cart.
Use	Interior/Exterior
Fire-Rated Polyurethane	Available
Also available in this texture	Custom Trusses, Beams, Mantels, L-Headers/2 Sided Beams, Planks
Touch-Up Kit Included	Yes - for factory-finished products
Manufactured In and Ships From	North Carolina
Rise	Rise is measured from the spring line to the inside of the arch
Shipping	Arched beams with a rise of 34 inches or greater will be manufactured as a single beam then cut in half for shipping. All other arched beams will be cut in half if they exceed 21 feet in length.